- When checking for sobriety, if the result is above 0.20 per mille, three short beeps are heard and the red LED is constantly lit. If the test result exceeds 4.00 per mille, the breathalyser beeps.
- The EC3 Breathalyzer has a bright, day-visible display that not only displays the sobriety test results in parts per thousand, but also various warning messages.
- The breathalyzer has a memory for the measurements taken and a test counter. The last 10 sobriety test results can be viewed on the device screen, and when the memory is full, older test results are replaced with newer ones.
- If the blow is too weak or too short, the breathalyzer will display the message "FLo" - the blow must be repeated properly.
- The breathalyzer measures the ambient temperature at start-up. If this temperature is higher or lower than the operating temperature of the breathalyzer, the message "OUT" is displayed. In this case, the sobriety test should be repeated in an appropriate temperature environment.
- Comfortably sized, black matte breathalyzer body made of shock and scratch resistant plastic.
- The breathalyzer also displays a two-level message about low and completely depleted batteries.
- To ensure that the results of the breathalyzer measurements are always correct, the accuracy of the breathalyzer must be checked regularly and calibrated if necessary. The Alcodetector EC3 displays a message that the device needs to be checked after 500 tests.
Technical data
Category: Personal breathalyzer with electrochemical sensor
Country of manufacture: South Korea
Sensor: Platinum electrochemical
Test counter: Yes
Calibration: electronic calibration (automatic reminder)
Calibration frequency: It is recommended to check the accuracy every 500 tests, but at least once every 6 months
Calibration Reminder: A message on the screen after 500 tests
Accuracy: ± 0.05 per mille at a result of 1.00 per mille
Preparation time: from 15 to 35 s
Analysis time: 3 to 22 s
Power supply: AAA Alkaline batteries, 2 pcs.
Memory: Last 10 tests
Operating temperature: + 5 ° C to + 40 ° C
Storage temperature: 0 ° C to + 40 ° C
Size: 114mm x 47mm x 24mm
Weight: 61.5g (84g with batteries)
Complete set
Breathalyzer
3 pcs. nozzles,
2 x AAA batteries
instructions
